Análisis por Elementos Finitos del Coeficiente de Fricción en un Modelo Poro-Elastohidrodinámico de Junta Sinovial

Authors

  • J. Di Paolo Grupo Biomecánica Computacional Facultad de Ingeniería – UNER. Casilla de Correo 47 Suc. 3, 3100 Paraná, Argentina.
  • C. V. Corvalán Grupo Biomecánica Computacional Facultad de Ingeniería – UNER. Casilla de Correo 47 Suc. 3, 3100 Paraná, Argentina.
  • F. A. Saita Instituto de Desarrollo Tecnológico para la Industria Química (UNL-CONICET), Güemes 3450, 3000 Santa Fe, Argentina.

Abstract

 

Computational results of a simple mechanical model having common characteristics with synovial joints are presented. The model describes the lubrication phenomenon taking place between two cylindrical surfaces covered by elasto-porous materials. Deformations, pressures and exudations on the lubricated surfaces are locally calculated as well as the amount of lubricating liquid flowing between them. For that purpose, the employed F.E.M is coupled with suitable techniques to parameterize the unknown location of the outflow boundary with zero pressure gradient. Several conclusions are presented regarding the self-lubricating and low friction characteristics of synovial joints and their connections with the liquid exuded by the porous surfaces.

Downloads

Download data is not yet available.

Downloads

Published

1999-03-15

How to Cite

Di Paolo, J., Corvalán, C. V., & Saita, F. A. (1999). Análisis por Elementos Finitos del Coeficiente de Fricción en un Modelo Poro-Elastohidrodinámico de Junta Sinovial. Revista Mexicana De Ingenieria Biomedica, 20(1), 7. Retrieved from https://rmib.com.mx/index.php/rmib/article/view/390

Issue

Vol. 20 No. 1 (1999): March

Section

Research Articles

License

Upon acceptance of an article in the RMIB, corresponding authors will be asked to fulfill and sign the copyright and the journal publishing agreement, which will allow the RMIB authorization to publish this document in any media without limitations and without any cost. Authors may reuse parts of the paper in other documents and reproduce part or all of it for their personal use as long as a bibliographic reference is made to the RMIB. However written permission of the Publisher is required for resale or distribution outside the corresponding author institution and for all other derivative works, including compilations and translations.

Dimensions Citation