Desarrollo de agujas hipodérmicas de bajo coeficiente de fricción para reducir la sensación de dolor

Authors

  • J. M. Rodríguez Lelis. Centro Nacional de Investigación yDesarrollo Tecnológico. Departamento de Ingeniería Mecánica -Tribología
  • J. A. Arellano Cabrera. Centro Nacional de Investigación y Desarrollo Tecnológico. Departamento de Ingeniería Mecánica -Tribología
  • J. Navarro Torres. Centro Nacional de Investigación y Desarrollo Tecnológico. Departamento de Ingeniería Mecánica -Tribología
  • S. Reyes Galindo. Centro Nacional de Investigación y Desarrollo Tecnológico. Departamento de Ingeniería Mecánica -Tribología
  • A. Abúndez Pliego. Centro Nacional de Investigación y Desarrollo Tecnológico. Departamento de Ingeniería Mecánica -Tribología
  • M. Vargas Treviño. Escuela de Ciencias, Universidad Autónoma «Benito Juárez» de Oaxaca.

Abstract

 

Drugs and other substances are generally applied through hypodermic needles. Pain is felt during the insertion of the needle into the body. This pain is attributed to shear, friction, and adhesive forces generated during the insertion. The present work shows the coating process by grinding and their application on the manufacturing of low frictional hypodermic needles. Resistance test on ballistic gel showed a reduction of friction coefficient and because of it the improvement needle insertion into soft tissues thys, in consequence reducing the pain sensation. 

Downloads

Download data is not yet available.

Downloads

Published

2009-10-02

How to Cite

Rodríguez Lelis., J. M., Arellano Cabrera., J. A., Navarro Torres., J., Reyes Galindo., S., Abúndez Pliego., A., & Vargas Treviño., M. (2009). Desarrollo de agujas hipodérmicas de bajo coeficiente de fricción para reducir la sensación de dolor. Revista Mexicana De Ingenieria Biomedica, 30(2), 7. Retrieved from https://rmib.com.mx/index.php/rmib/article/view/313

Issue

Vol. 30 No. 2 (2009): December

Section

Research Articles

License

Upon acceptance of an article in the RMIB, corresponding authors will be asked to fulfill and sign the copyright and the journal publishing agreement, which will allow the RMIB authorization to publish this document in any media without limitations and without any cost. Authors may reuse parts of the paper in other documents and reproduce part or all of it for their personal use as long as a bibliographic reference is made to the RMIB. However written permission of the Publisher is required for resale or distribution outside the corresponding author institution and for all other derivative works, including compilations and translations.

Dimensions Citation